Guide On How to Restore Faded Plastic Toys!

Plastic wastage is already a huge issue in the world, and the number of items that we people throw away with just random fault makes it even worse. There are cheap plastic toys, that parents buy for their children.

And because as a new parent it must be already very expensive for you to raise a kid, not being able to invest in plastic alternatives is sad but understandable.

However, there are folks who would just give up on their bought plastic toys with barely some fading of colors and buy new ones. Not only they are spending more than necessary, but all that extra plastic is also just bad news.

However, by looking up how to restore faded plastic toys, you’ve shown some responsibility and I really appreciate that. As a present, would you like some ways, methods, or tricks (whatever you want to call it) on restoring the fade pieces?

So How to Restore Faded Plastic Toys

It’s actually impossible to fully return the faded plastic toys. But you can be a little clever ad try using paint, restorer, primer, natural elements with water, and even scrubbing. One of these, hopefully, will help bring back the previous look at some extent.

Reading the short summary of what to do, might feel encouraging, but also confusing at the same time. The steps that go into the process might still feel, tricky to conduct. Bringing back the look would be easy if you know some details, I believe And, to do that, you’ll need some tools that would help in further assistance. 

Plus, it has to be of good quality and workable to use in the following procedure. FYI, the plastic material holds lots of oil that cause it to become fade over time. Another reason why you must use the best tool.

My Recommendation

I find the Car Guys Plastic Color Restorer finest for restoring faded or cracked surfaces. And also, it is small enough to carry or store anywhere plus you’ll find a sponge. This works great on plastic, vinyl, or rubber surfaces.  

Restoring Faded Plastic Toys Is a Simple Job – Trust the Procedure.

Knowing how to restore color to faded plastic toys might seem hard but not exactly. It doesn’t need special training or talent to do the process. All you need is effort and of course maintaining the right flow based on the faded level of plastic.

Plus, don’t use the same trick on all types of plastic unless you want damages. Now, let’s drive into the steps. 

Return Faded Hard Plastic Toys.

Hard plastic toys are dense and solid that require sanding to return the natural shade. And to do that you’ll require a bucket, soap, and water mixture, along with 150-grit and 220-grit sandpapers.

Follow the given directions:

  • Make a mixture using 2.5 tablespoons of soap in 1-gallon hot water. 
  • Grab the 150-grit sandpaper and put it inside the water-soap mixture. And then, use the sandpaper over the hard plastic surface in a spherical motion. Be sure to do this for 5 to 6 minutes nonstop. 
  • Take the 220-grit sandpaper and dip it inside the mixture. Again, rub in round movement in the hard plastic toys for 6 minutes just as done with 150-grit sandpaper. 
  • Lastly, wash the surface with water. And, that’s it. 

Note: If the plastic toy is larger and stronger, then use the 220-grit one to level the scuff created after sanding with 150-grit sandpaper. 

Bring Back Faded Vinyl Plastic Toys.

Toys that are made with vinyl plastic will require natural solutions like vinegar and water mixture to restore the natural color. Here are the instructions:

  • Take a bowl using 5 cups of vinegar in 1 gallon of hot water. 
  • Place the mixture into a spray bottle. 
  • Hold the vinyl plastic toys and spray down the mixture by maintaining a 1 to 2 feet distance. 
  • After that, let them be like that for 3 to 5 minutes. 
  • Finally, wash the toys using cold water and use tissue or towel to dry them well.

Note: Maintain the vinegar and water ratio and don’t add too much of them as it will create an imbalance in pH level.

Alternative Method: 

If you don’t have vinegar in your kitchen, then use hydrogen peroxide hair cream. Take a look into the procedure: 

  • Place all the plastic toys in one place and clean them. 
  • Use one layer of hair cream on the surface and rub nicely. Be sure it has 9% to 12% hydrogen peroxide.  
  • Use plastic wrap to cover the toys. 
  • Place them outside the home so that direct sunlight contacts easily. 
  • Again, apply hair cream every hour for 3 to 6 hours. If that doesn’t help remove discoloration then, repeat the process. 
  • Wash off the plastic toys in the cold water and clean them using a towel. 

Use Paint to Reinstate Faded Plastic Toys.

One of the most impactful methods to bring back faded plastic toys is painting. However, this technique will need tons of works and endurance. 

For Your Information – The primer can help your paint to cover pores nicely. And also, it ensures no hassle of peeling or crack in humidity temperature. 

If you are interested to get one, try Vallejo Acrylic Surface Primer, ideal for covering toy holes.

Let’s learn how to make faded plastic look new down below:

  • Clean the plastic toys. If they are painted beforehand, then use sand to level the surface a couple of times. 
  • Place cloth and put the plastic toys. Then, apply the plastic color restorer on the surface.   
  • Use primer on the surface with a small brush for 2 to 3 coats.
  • Wait for 1-2 hours to air dry.  
  • Use the paint with a brush on plastic toys. Be sure to apply 2 to 3 coats if possible. And then dry the surface after 2 hours.  

Frequently Asked Questions:

Are plastic toys recyclable?

Nearly all plastic toys are hard to recycle as they can cause harm to the environment. Besides, the shape and layout matter when it comes to the recycling process. 

Does Vaseline restore plastic?

No! However, it has petroleum jelly that helps the plastic to look glossy. So, when you use Vaseline on the surface and rub nicely, it will only remove the dull look slightly.

How do you brighten plastic toys?

To brighten plastic toys, baking soda plays a nice role. You only need to scrub the baking soda on plastic with a few drops of water using the sponge. And, that way it will eventually brighten up naturally. Don’t expect drastic results though.

Wrap Up 

And that’s it! I tried to explain how to restore faded plastic toys in the easiest words and kept the methods simple to conduct. Hopefully, this will give you some good results.

And you don’t have to throw away the toys just now. However, if the toys spend a long period withstanding your little one’s grabbing, chewing, scratching, rolling, throwing, and so on, it might actually be completely unusable now.

In that case, find out some ways on recycling plastic toys and replace them with new ones. But before that, give it a last chance by trying these methods.

Related Posts:

Recent Posts